Control Block


1. Control Block
    Control Block


  • Components: Control block (1), joystick module (1), potentiometer module (1), button module (4) (All 4 buttons, potentiometer, and joystick modules can be connected and used simultaneously)
  • Specifications:
    •Button: Transmit a signal of 1 when pressed, 0 when released
    •Potentiometer: 0~4095 rotation
    •Joystick: Up (4095), Down (0), Left (0), Right (4095)


  • 2. Connect to the Control Block
      Control Block Connected to Board


      3. Scratch Blocks used for Control Block operation


        When button 1 is pressed, output ‘pop’ sound Use the conditional block of button 1 to output ‘pop’ sound
        Scratch Code Scratch Code
        Use button 1 and 2 to show or hide a Sprite Check potentiometer value
        Scratch Code Scratch Code


        4. Applications of the Control Block


          Create a game controller Control a robot arm
          Game controller Robot arm
          Control a robot car Piano sustain pedal
          Robot car Piano sustain pedal


          5. Modules that can be connected to the Control Block
          (Click on the picture to go to the product page. COMING SOON)


            Potentiometer Joystick Button Piano Sustain Pedal
            Potentiometer Joystick Button Piano Sustain Pedal


            6. Create a Controller


              Components
              Controller Parts




              1 Connect the joystick module to the bottom plate using rivets as shown in the
              figures below.
              Assambling of joystick




              2 Fasten the control block, potentiometer, and two buttons to the bottom plate
              using rivets as shown in the figures below.
              Assambling of joystick




              3 Connect each part with cables as shown in the figures below.
              Assambling of joystick




              4 Fasten the supports to the bottom plate using screws as shown in the figures below.
              Assambling of joystick




              5 Remove the protective vinyl from the top plate and attach to the bottom plate
              using screws as shown in the figures below.
              Assambling of joystick




              Complete
              Completed joystick